How Much Does Concrete Driveway Cleaning Cost?
Last Updated: November 10, 2026
Quick Summary
A concrete driveway cleaning cost estimate usually falls between a few hundred dollars and a few hundred more, depending on size and condition. Standard concrete is often priced at roughly $0.30 to $0.55 per square foot, so a written quote is the most reliable way to know the driveway cleaning cost for your property.
A 20-by-30-foot driveway is 600 square feet, which gives a base range of $180 to $330.
Oil spots, rust stains, algae, and tire marks are often quoted as separate line items.
Ask providers whether they set a minimum charge for small jobs, and get it in writing.
Surface cleaners distribute pressure evenly and reduce the striping a wand can leave.
Aggressive pressure on old or hairline-cracked concrete can widen cracks, so test a small area first.
How much will my driveway cleaning cost?
Advanced Paving and Sealcoating, Inc. provides free estimates for driveway cleaning across Central Illinois.
Table of Contents
What Concrete Driveway Cleaning Typically Costs
Most homeowners in Decatur and Central Illinois can expect a concrete driveway cleaning cost estimate to fall somewhere between a few hundred dollars and a few hundred more, depending on size and condition. Pricing depends on the size and condition of the surface, so the most reliable way to know what a job will cost is to request a written quote.
Price is only part of the picture. The same driveway can come back quoted very differently depending on how much oil staining, grit, or heavy buildup needs attention. Advanced Paving and Sealcoating, Inc. can provide a quote based on the specific surface and conditions of your property.
Cost to Power Wash a Driveway per Square Foot
A common way contractors price concrete work is by square footage, though rates vary widely with the scope of the job.
Keep in mind that per-square-foot figures are a convenient way to compare quotes, not a guarantee. Minimum job charges, travel, and surface condition can all move the final number.
Factors That Raise or Lower a Cleaning Quote
Several variables push a quote up or down. For context on what residential paving work typically costs, see residential asphalt paving costs. Surface type matters, since different materials call for different cleaning approaches. Heavy staining, aggregate exposure, and built-up grime that needs manual scraping or pre-treatment can also add cost beyond a standard square-foot estimate.
Other factors include driveway size and shape, how easily water and equipment can reach the area, and whether the job includes sidewalks or other flatwork. Ask any provider to itemize these pieces so you can see exactly what you are paying for.
Cost to Power Wash Driveway and Sidewalk Together
Bundling a driveway with an adjoining sidewalk can be a practical way to combine work on one site. Total cost will still depend on the combined square footage and how dirty each surface is, so request a single quote that lists both areas clearly.
Worked Estimate for a Typical Residential Driveway
A useful estimate has five parts: measured area, base rate, minimum charge, condition add-ons, and the total. Working through each line lets you check a written quote instead of accepting a headline number.

Step 1: Measure the area. Multiply length by width for each rectangular section, then add the sections together. A 20-by-30-foot driveway is 600 square feet. If you include a 4-foot-wide sidewalk running 40 feet alongside it, add 160 square feet for a combined total of 760 square feet. Irregular shapes are easier to measure by splitting them into rectangles and triangles.
Step 2: Apply a base rate. Many providers price standard concrete at a per-square-foot rate that falls roughly between $0.30 and $0.55, based on the published estimates cited earlier in this guide. For 600 square feet, that produces a base of $180 to $330. Use the low end only when the surface is lightly soiled and access is easy. Use the high end when the crew must set up on a slope, move equipment through a gate, or work around parked vehicles.
Step 3: Check the minimum charge. Ask any provider whether they set a minimum charge for small jobs, and request that figure in writing.
Step 4: Add condition-based line items. These are the costs that a flat square-foot number does not capture:
Oil or grease spots that need a degreaser and dwell time, often quoted per spot or per small patch.
Rust stains from metal furniture or vehicle parts, which usually require an oxalic-acid-based treatment and rinse.
Algae or moss on shaded concrete, which needs longer contact time with a biocide.
Tire marks and embedded grime that need scrubbing in addition to pressure.
Old sealant residue, which may need a chemical stripper before the surface can be cleaned evenly.
Ask the provider to name each of these separately so you can see which one drives the total.
Step 5: Add the total. Add the base rate and each condition-based line item to reach a total. Treat the result as a benchmark for comparing written quotes, not a final price.
When two quotes differ by more than the range above, check whether one includes pretreatment, rinsing, and cleanup, and whether either excludes stain work. The difference is often scope, not price.
Watch out: A low per-square-foot quote that excludes stain treatment can end up costing more if additional work is needed later.
The table below lists the cost-building steps from the worked estimate so you can check a written quote line by line.
Step | What to check | Figure from the article |
Measure the area | Length × width per section, summed | 20 × 30 ft = 600 sq ft |
Apply a base rate | Per-square-foot rate for standard concrete | $0.30 to $0.55 per sq ft |
Base cost for 600 sq ft | Low to high range | $180 to $330 |
Check minimum charge | Ask for it in writing | Varies by provider |
Add condition items | Oil, rust, algae, tire marks, old sealant | Each quoted separately |
Add the total | Base plus condition items | Benchmark, not final price |
Driveway Pressure Washing Attachment vs. Hiring a Pro
Whether DIY makes sense depends less on the price of a washer and more on the condition of the concrete and the type of staining you need to remove. Pressure washing is a surface-removal method. Applied to sound, well-cured concrete it removes dirt and grime safely. For the step-by-step method for stains and cleaning, see step-by-step stain and cleaning method before deciding whether to do it yourself. Applied to weak, scaling, or hairline-cracked concrete it can remove the surface layer itself.
When DIY is reasonable. A homeowner with a light layer of dust, pollen, or seasonal dirt on a stable slab can often do the job with a rented or purchased pressure washer and a surface cleaner attachment. A surface cleaner, a rotating head that sits on the ground, distributes pressure evenly and reduces the striping that a wand can leave.
When a pro is the better choice. Hire a crew when the driveway has oil or rust that needs chemical pretreatment, when the concrete shows scaling or spalling, when the slab is older and has been sealed with a product that must be stripped first, or when the area is large enough that a rented unit would require several days of work.
Equipment cost comparison. Renting a gas pressure washer for a day typically costs less than a professional visit, but the total can rise once you add a surface cleaner, detergent, a degreaser, and the time to set up and clean up. Buying a unit makes sense only if you expect to clean regularly over several years. Compare the rental-plus-supplies total against the professional quote, and include your own hours.
How to judge a crew. Ask what pressure range they use and whether they adjust it by surface type. Ask whether they pretreat stains and how long they allow for dwell time. Ask whether they test a small area first. A provider who can explain these steps in plain terms usually understands the surface they are working on. A provider who quotes the same method for every job without asking about the concrete deserves a second look.
Watch out: Aggressive pressure on old or hairline-cracked concrete can widen the cracks and etch the surface, and those repairs often cost more than the cleaning itself. Test a small, inconspicuous area first, and keep the nozzle moving.
Booking Your Driveway Cleaning Estimate in Decatur
If you are ready to compare real numbers for your property, Advanced Paving and Sealcoating, Inc. offers free estimates for driveway cleaning and related asphalt and concrete work across Central Illinois. To compare maintenance options available in Illinois before requesting a quote, read asphalt maintenance options in Illinois. Our family-owned team has more than 20 years of experience, and we are available 24/7 for urgent needs. Homewyse concrete driveway cleaning cost guide is a useful benchmark to read alongside your written quote. For timing, see our Best Time to Sealcoat a Driveway: A 2026 Guide before scheduling. Get a free estimate from Advanced Paving and Sealcoating, Inc. today.
Frequently Asked Questions
How much does it cost to pressure wash a 2000 sq ft driveway?
Pricing depends on the size and condition of the surface. Ask each provider for a written quote and whether it includes stain pretreatment. Final pricing depends on the scope and conditions of your specific site.
How much does a 20x20 concrete driveway cost to clean?
A 20 by 20 foot driveway covers 400 square feet. Many providers also set a minimum job charge, so a small driveway may be priced at that minimum rather than strictly by area. Ask whether the quote is per square foot or per project.
What factors influence the cost of driveway power washing?
The main drivers are total square footage, surface condition, and how much access the crew has to a water source. Oil stains, rust, moss and heavy buildup usually require pretreatment or manual scraping, which adds labor. Aggregate or textured concrete can also take longer than smooth slabs. A written scope that lists these conditions makes it easier to compare quotes fairly.




Comments